Product Details; Assembly And Use Of The - EAS ELECTRIC EHH201 Manual De Instrucciones

PRODUCT DETAILS

ASSEMBLY AND USE OF THE DEVICE
1. According to fig.1, turn the body down with the bottom upward, and the
screw out onboard screws.
2. According to fig.2, remove the supports. Aim the buckle on the support
at the hole, push the supporting foot until the holes on support coincides
with the screw hole on the machine.
3. Penetrate the removed screws through the support holes and tighten in
the machine table.
4. After the installation is completed, turn the body upward for use.
Figure 1
Air
outlet
Fan
6
Handle
Power switch
Thermostat
Support
Screw
Support
Hole
Figure 2
V.1