ANATEL MiBox UNICORN Guía De Configuración Rápida página 2

Ports and LED


"24VDC OUT" Port: Used to connect the power cable (included) to the scanner.

USB Port: Used to connect the USB cable (included) to the scanner.

Power LED: Turns green when the box is powered on.
Status LED: The color of the LED indicates the connection type and status.
LED Color Status
Orange Solid
Fast
Blinking
Slowly
Blinking
Green Solid
Fast
Blinking
Slowly
Blinking
Red Solid
Wi-Fi/LAN LED: Flashes in blue color in wireless network connection. (The
Wi-Fi connection is always enabled whenever the power is connected.)
2

Description
Wired LAN mode with scanner connecting to the MiBox
Wi-Fi internet (client) mode with scanner connecting to the
MiBox
Wi-Fi direct share (access point) mode with scanner
connecting to the MiBox
Wired LAN mode with scanner disconnecting to the MiBox.
Wi-Fi internet (client) mode with scanner disconnecting to the
MiBox
Wi-Fi direct share (access point) mode with scanner
disconnecting to the MiBox
Firmware updating
