ANATEL MiBox UNICORN Guía De Configuración Rápida página 7

Operation
Before You Begin!
To use the network scanner, please first download and install the latest scanner driver from
Avision's web site (www.avision.com).
Scan from A Wired Computer
1.
Launch your TWAIN-compliant image-editing software application such as Avision
Capture Tool by choosing Start>All Programs>Avision xxx Scanner>Avision Capture
Tool (xxx indicates your scanner model).
2.
A [Select Scanner Model] dialog box appears. Choose your scanner model and click
[OK].
If there is more than one scanner on the network, a [Network Scanner] dialog box will be
prompted. Choose your desired scanner and click [OK].
3.
The main window of Avision Capture Tool appears. Press [Scan] to start scanning. In a
second, the scanned image will be displayed.
Important:
Make sure the LAN cables have been connected properly on your switching hub FIRST and
then connect the power of the MiBox. Otherwise, other computers in the network may obtain
IP address from the MiBox and therefore may not connect to the internet.
7