ANATEL MiBox UNICORN Guía De Configuración Rápida página 9

5. After the Wi-Fi connection is successful, choose [STATUS] to check if the selected
[Network Name] (SSID) has been connected.
Scan from a Wireless Computer
1.
On your wireless computer, click the [Wi-Fi Network] icon in the taskbar and select your
specified [Network Name] (SSID). Wait a few seconds for the connected status
confirmation. (Important! The same network name (SSID) has to be selected so that
MiBox and your wireless computer are in the same wireless LAN.
2.
Follow step 1 to 3 described in the preceding section [Scan from a Wired Computer] to
complete a scan.
Scan from A Mobile Device
1. Make sure that the [MiBox] APP has been installed on your mobile device. The [MiBox]
APP can be purchased for free from an application store such as Google Play or App
Store.
2. In [Direct Share] (Access Point) mode, on your mobile deice, tap Settings>Wi-Fi and
choose the network name (SSID) – MiBox-.xxxx. (xxxx is where the last four digits of the
Mac address on the label on the MiBox).
9