Daily Use - Bang & Olufsen BeoSound 35 Manual De Instrucciones

BeoSound 35 supports a variety of music sources.
When you switch on a source, it may take a
couple of seconds before sound is heard in the
speaker. If the source is unavailable, a message
will appear on the display.
The order of the sources can be changed via
Bang & Olufsen app (YOUR CONTENT >
SOURCES). The order will only apply to
BeoSound 35.
Internet radio
If you have a TuneIn® account, you can listen to
internet radio stations from all over the world.
Start streaming from the list of favourite radio
stations via the BeoSound 35 display or your Bang
& Olufsen app. Use Bang & Olufsen app to browse
and edit in your favourites list.
Music services
Your BeoSound 35 supports Spotify Connect®,
Deezer® Premium+ and QPlay®*. Enter your
credentials for the accounts in Bang & Olufsen app
and select a music service and stream music. The
sources can also be selected directly on the
BeoSound 35. For more information, visit our
Frequently Asked Questions (FAQ)
Bluetooth
You can use Bluetooth to stream from any music
source or directly from your hand-held device if
you have selected 'BeoSound 35_xxxxxxxx'**
(serial number) in the Bluetooth menu on your
device.
* Not all music services are available on all markets.
** Product name can be changed in the Bang &
Olufsen app.
*** AirPlay can be used with iPhone, iPad, and iPod
touch with iOS 4.3.3 or later, Mac with OS X
Mountain Lion or later, and Mac and PC with iTunes
10.2.2 or later.

Daily use

AirPlay or media servers
®
Connect BeoSound 35 to your network and use
AirPlay*** to stream from your hand-held device
or computer to BeoSound 35. Press the
on your device and select 'BeoSound 35_
xxxxxxxx' in the list. You can also use your Bang &
Olufsen app to stream from digital sources, such
as media servers, to BeoSound 35.
Note that AirPlay sound cannot be distributed
between BeoLink Multiroom products due to
limitations set from Apple.
Google Cast
TM
With Google Cast built into BeoSound Essence,
you can easily cast music to the product, just tap
the Cast button from your favorite mobile music
apps to instantly start playing on the speakers.
Then control the speakers right from your phone
– search, play, pause, and turn up the volume –
anywhere in the house.
To use Google Cast, the feature must be enabled. If
not enabled during first-time setup, use the Bang
& Olufsen app, enter 'YOUR CONTENT' – 'GOOGLE
CAST' to enable or disable the feature.
section.
Line-in and optical
Connect a source via line-in or optical and use the
connected equipment's operation panel. If you
stop playback, BeoSound 35 will go to standby
after 3 minutes.
BeoLink
Use the Bang & Olufsen app to join and operate
BeoLink sources being played in your network.
While a source is playing, you can also use the GO
button on BeoSound 35 to join the source. If
several sources are playing, use or to step in
sources and press the GO button to select.
In a multiroom setup, sound from line-in or optical
sources need a delay. In a video setup, picture and
the sound may be out of sync. To solve this, you
should switch off the delay. The delay can be
switched on or off via Bang & Olufsen app. Go to
SOUND and select DELAYS. Follow the
instructions. Note that if the delay is switched off,
you cannot distribute sound in a multiroom setup.
Software update
In order to ensure that your product has the latest
features and improvements, automatic system
icon
software updates are enabled by default, and this
is the recommended setting. You may change this
at any time in the UPDATE PRODUCT SOFTWARE
menu using the Bang & Olufsen app. Do not
disconnect from the mains during software
updates. A stable Internet connection is required.
Log information
To help us improve our range of available products
and services offered to you, we may request
certain information from your product about its
performance and usage patterns. The information
will at all times be provided on an anonymous
basis only. You can at any time easily disable this
function in the STATUS menu using the Bang &
Olufsen app.
Cleaning
Cabinet and display
Wipe dust off the surfaces using a dry, soft cloth.
Do not use liquid cleaners or aerosol cleaners.
To remove stains or dirt, use a soft, damp cloth
and a solution of water and mild detergent, such
as washing-up liquid.
Front cover
The front cover may be cleaned with a vacuum
cleaner with a brush nozzle, and set to the lowest
suction level.
Never use alcohol or other solvents to clean any
part of the product!
5