Environmental Protection; Declaration Of Conformity - Worx WX240 Manual De Seguridad Y Funcionamiento

TROUBLE SHOOTING
problem Possible cause
1. USB cable not
plugged in
2. Surrounding
Battery will
air temperature
not charge
is too hot or too
cold
During
The battery of
operation,
screwdriver is
the
dead, or the
screwdriver
torque cannot
stops
reach
working
FOR BATTERY TOOLS
The ambient temperature range for the use and storage
of tool and battery is 0 C-45
o
The recommended ambient temperature range for the
charging system during charging is 0
Solution
1. Plug in the USB
cable again, and
check the status
of the lamp and
check whether
the current is
connected
2. Move the
product to an
environment
with appropriate
temperature for
charging
Charge or increase
torque
C.
o
C-40 C.
o o

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.

DECLARATION OF CONFORMITY

We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery operated screwdriver
Type designation WX240 WX240.X (2-designation
of machinery, representative of screwdriver)
Function Tightening and loosening screws, nuts
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1
EN 62841-2-2
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
13