Eaton SGI Instrucciones De Instalación

IB519022EN
Installation Instructions - SGI Fixture
Instructions d'installation - Luminaire SGI
Instrucciones de instalación - SGI Fixture
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Cooper Lighting assumes no responsibility for claims
brought about by improper or careless installation or
handling of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
SGI Fixture Installation Instruction (Step 1-3)
1. Remove access plate on back of fixture to access
quick disconnects for electrical connections. (Figure 1.)
Figure 1.
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
Edges May Cut. Handle with care.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Minimum 90° supply conductors.
N ote:
2.
3.
Access Plate
Housing
Quick
Disconnects
Figure 2.
Brand Logo
reversed out of
black
CAUTION
CAUTION
Specifications and dimensions subject to change
without notice.
If Mounting Security Clips (purchased separately) are
being used with the fixture, attach them to the ends
of the fixture using self-tapping screws which are
included in the Mounting Security Clip bag.
Lay fixture in T-grid or drywall framing kit. Note,
fixture is intended only for 1" through 1-1/2" T-grid.
(Figure 2.)
INS # INS #
Fixture
T-Grid