Eaton Metalux SK-22-WS Manual De Instrucciones

ADF142843
Installation Instructions – Field Install Surface Mount Kits – 2' x 2',
2' x 4', 1' x 4' and 1' x 2'
Instructions d'installation – Trousses de montage à la surface pour une
installation sur place – 61 cm x 61 cm (2 pi x 2 pi), 61 cm x 122 cm
(2 pi x 4 pi), 30 cm x 122 cm (1 pi x 4 pi) et 30 cm x 61 cm (1 pi x 2 pi)
Instrucciones de instalación de los kits de montaje en superficie para
instalación en campo de 2' x 2' (0,61 m x 0,61 m), 2' x 4' (0,61 m x
1,22 m), 1' x 4' (0,3 m x 1,22 m) y 1' x 2' (0,3 m x 0,61 m)
WARNING
RISK OF ELECTRIC SHOCK—Disconnect power at fuse
or circuit breaker before installing or servicing.
WARNING
Risk of fire/electric shock. If not qualified, consult an
electrician.
WARNING
Risk of fire or electric shock. Luminaire's wiring,
ballasts, or other electrical parts may be damaged
when drilling for installation of reflector kit hardware.
Check for enclosed wiring and components.
WARNING
The weight of the luminaire (ONLY) not to exceed 40 lbs.
Description:
The universal field install surface mount kits allow for numerous recessed fixture families from Eaton's
Cooper Lighting business to be installed in plenum-less spaces. Ideal for retrofits, remodel projects, or where a
recessed fixture is preferred but plenum space is not available. The surface mount kit works with 2' x 2', 2' x 4', 1' x 4'
and 1' x 2' Metalux, Fail-Safe, Corelite and Neo-ray product lines. See chart and ordering information for specific avail-
ablility.
Construction:
The surface mount kits feature snap-together frame design constructed of die-formed 20 gauge cold
rolled steel. Finish is high reflectance white using electrostatically applied polyester powder coat paint.
Ordering Information:
Upon placing an order for a recessed fixture confirm which surface mount kit provides a correct
fit using the chart on page 4. Then order the kit(s) using the catalog numbers listed below.
Catalog No. Description
SK-22-WS 2' x 2' Surface Mount Kit, Shallow
SK-24-WS 2' x 4' Surface Mount Kit, Shallow
SK-22-WT 2' x 2' Surface Mount Kit, Tall
SK-24-WT 2' x 4' Surface Mount Kit, Tall
NOTE: This product must be installed in accordance with
the applicable installation code by a certified electrician
familiar with the construction and operation of the product
and hazards involved.
NOTE: Only those open holes indicated in the
photographs and/or drawings may be made or altered as a
result of kit installation. Do not leave any other open holes
in an enclosure of wiring or electrical components.
NOTE: To prevent wiring damage or abrasion, do not
expose wiring to edges of sheet metal or any sharp
objects.
NOTE: Disconnect all power before proceeding.
Catalog No. Description
SK-14-WT 1' x 4' Surface Mount Kit, Tall
SK-12-WT 1' x 2' Surface Mount Kit, Tall
Brand Logo
reversed out of
black
INS # INS #