• Take a thin lock of hair between your fingers, the same width as the brush.
• Wrap the lock of hair around the brush no more than twice.
• Set the air styler at the maximum temperature.
• Wait for the lock to dry as desired before releasing it from the brush.
Brush with retractable pins (6)
Use this accessory for more defined and styled hair.
• Take a thin lock of hair between your fingers, the same width as the brush.
• Wrap the lock of hair around the brush no more than twice.
• Switch the hair dryer brush ON to the maximum temperature.
• Wait for the lock to dry as desired before releasing it from the brush.
• To facilitate releasing the lock of hair from the brush, rotate button (6a) to the right.
Set the air flow and temperature to the following levels with the (2) button:
0 = OFF
1 = high air flow and average temperature
2 = high air flow and high temperature
When the air styler is not used, unplug the appliance from the socket and store it in a dry and
dust-free place.
Do not wind the power cord around the appliance. Coil it up loosely without
bending it.
IMPORTANT! Switch the appliance off and unplug it from the socket before cleaning!
Make sure all cleaned parts are completely dry before reusing the appliance!
Cleaning the appliance and accessories
Clean the appliance and the accessories with a damp cloth, when necessary. Do not use
solvents or other aggressive or abrasive detergents. Otherwise, the surface could be damaged.
Check the intake opening of the appliance regularly and remove all hair and dust.
Note: the more dust is present in the place where the hair dryer is used, the more often the filter
duct must be cleaned.
The product is packaged in recyclable materials.
Dispose of these in an appropriate environmentally friendly manner.
Pursuant to European Standard 2002/96/EC, the appliance must be disposed of at the
end of its life span in a compliant manner. This regards recycling useful substances in the
appliance, which reduces the environmental impact. For further information, contact the
local disposal body or the appliance dealer.
To request repairs or purchase spare parts, please contact IMETEC's authorised customer
service centre on the Number below or via the website.
The appliance is covered by the manufacturer's warranty. For details, read the attached warranty
sheet.
Failure to comply with the instructions for use and maintenance provided in this manual will
render the manufacturer's warranty null and void.
MANUEL D'INSTRUCTIONS POUR L'UTILISATION DE LA BROSSE SOUFFLANTE
Cher client, IMETEC vous remercie d'avoir choisi ce produit.
ATTENTION ! Instructions et mises en garde pour
une utilisation sûre
Avant d'utiliser l'appareil, veuillez lire attentivement
USE
STORAGE
MAINTENANCE AND CLEANING
DISPOSAL
ASSISTANCE AND WARRANTY
FRANÇAIS
7