Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE APPLIANCE AND ITS ACCESSORIES
Refer to page I of the Illustrative Guide to check the contents of the package.
All the figures are on the inside pages of the cover.
1.
Anti-scalding inserts
2.
Heated bodywork
3.
LED display
4.
Button lock activation LED
5.
Plate closing lock
6.
Power cable
7.
Technical data
8.
Button
(off/on)
9.
Temperature adjustment buttons (+
For the appliance features, refer to the external packaging.
Use the supplied accessories only.
A quick understanding of how to use the hair straightener will allow you to establish the exact
application time to achieve the desired effect on your hair.
•
Ensure your hair is dry, clean and without any trace of hairspray, hair mousse or gel.
•
Comb your hair ensuring there are no knots. Start straightening from the nape of the neck,
proceed on the sides and finish on the forehead.
•
During use, when the plates heat and cool, position the appliance on a smooth and heat
resistant surface.
•
While straightening, be careful not to near the plates too much to the sensitive parts of the
face, ears, neck or head.
•
Leave the plates to cool down completely when finished, before putting the appliance away.
PREPARING YOUR HAIR
•
Wash hair as normal and comb to remove knots.
•
Dry your hair and brush from the roots to the ends.
OPERATION
Depending on the desired effect, choose whether to use the straightener with the following
accessories:
•
Sleek Volume Shell (12)
•
S-Wave Shell (13)
•
Luxurious Curl Shell (14)
•
Curl Shell (15)
Discover all the hairstyles by visiting www.imetec.bellissima.com..
INSTRUCTIONS FOR USE
•
Before inserting or removing the shells, make sure the straightener is cold.
•
Insert the shell (12, 13, 14, 15) by sliding it on the heated body (2).
•
Connect the plug (6) to the mains.
•
Press the
button (8). The LED display (3) lights up.
•
Select the desired temperature between 150°C and 230°C, depending on the type of hair
and the desired effect; the temperature can be adjusted at any time by pressing + or - (9).
•
After having selected the desired temperature, the button lock can be activated by pressing
the
button (8) twice and quickly. This function prevents accidental temperature changes
while using the straightener. The activation of the button lock is signalled by the LED (4)
going on; the lock can be deactivated by pressing the
•
The LED display (3) flashes until the plates reach the set temperature.
•
Once the temperature is reached, the LED display (3) remains on.
•
Take a thin lock of hair, which is the same width of the plate and not too voluminous, and
place it between the two plates.
•
Keep the lock of hair taut with one hand and slide the plate closed with the other hand, from
the roots down to the ends.
•
Once the hair is styled, switch the appliance off by keeping the
disconnect the straightener from the socket.
NOTE: steam may appear while straightening; this is excess humidity in the hair
that evaporates.
GENERAL INSTRUCTIONS
USEFUL TIPS
USE
7
and - buttons)
10.
Ionizer device slot (where present - for
the hair straightener features, refer to
the external packaging)
11.
Heating plates
12.
Sleek volume shell
13.
S-wave shell
14.
Curl shell
15.
Luxurious curl shell
button (8) twice once again.
button (8) pressed and
Publicidad
Capítulos
