Environmental Protection - Ratio HR250NM Manual De Instrucciones

Do not allow the sandpaper to wear away, it will
damage the sanding pad. The guarantee does
not cover sanding pad wear and tear.
Use coarse grit paper to sand rough surfaces,
medium grit for smooth surfaces and fine grit for
finishing surfaces. If necessary, first make a test
run on scrap material.
Excessive force will reduce the working
efficiency and cause motor overload. Replacing
the accessory regularly will maintain optimum
working efficiency.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling
advice.
34
GUARANTEE
This product has been manufactured to the
highest standards. It is guaranteed against
faulty materials and workmanship for at least 24
months from purchase. Please keep your receipt
as proof of purchase. If the product is found to
be defective within the duration of the guarantee
period, we will either replace all defective parts
or, at our discretion, replace the unit free of
charge with the same item or items of a greater
value and /or specification.
This warranty is invalid where defects are caused
by or result from:
1. Misuse, abuse or neglect.
2. Trade, professional or hire use.
3. Repairs attempted by unauthorised repair
centres.
4. Damage caused by foreign objects,
substances or accident.
Ehlis S.A.
c/. Sevilla s/n. Polígon Industrial Nord-Est 08740
Sant Andreu de la Barca Barcelona-España