General Power Tool Safety Warnings - Makita LT01 Manual De Instrucciones

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Fastening capacities
No load speed
Impacts per minute
Maximum fastening torque
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
Model:
Fastening capacities
Square drive
No load speed
Impacts per minute
Maximum fastening torque
Overall length
Rated voltage
Standard battery cartridge
Charger
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
SAFETY WARNINGS

General power tool safety warnings

WARNING:
Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Machine screw
Standard bolt
High tensile bolt
Standard bolt
High tensile bolt
4 mm - 8 mm (5/32" - 5/16")
M4 - M12 (5/32" - 1/2")
M4 - M8 (5/32" - 5/16")
361 mm - 380 mm (14-1/4" - 15")
D.C. 10.8 V - 12 V max
BL1016 / BL1021B / BL1041B
DC10SB / DC10WD
1.2 - 1.6 kg (2.7 - 3.6 lbs)
M4 - M12 (5/32" - 1/2")
M4 - M8 (5/32" - 5/16")
361 mm - 380 mm (14-1/4" - 15")
D.C. 10.8 V - 12 V max
BL1016 / BL1021B / BL1041B
DC10SB / DC10WD
1.2 - 1.6 kg (2.7 - 3.6 lbs)
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
2 ENGLISH
LT01
0 - 2,000 /min
0 - 3,000 /min
60 N•m
LT02
9.5 mm (3/8")
0 - 2,000 /min
0 - 3,000 /min
60 N•m