Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Intended use
This trimmer is intended solely for the care of lawn
edges and smaller grass and lawn areas in private
households.
Any other use is classed as an unintended use.
The user is liable for any damages arising from
unintended use.
Incorrect/abnormal use
This trimmer should not be used in public facilities,
parks, sports grounds, roads etc. nor in agriculture
or forestry.
Due to the risk of bodily injury to the user, the trim-
mer must not be used:
- to trim bushes, hedges and shrubs;
- to cut owers;
- for shredding for the purpose of composting.
Identi cation plate
Position
The identi cation plate is located on the trimmer
casing.
Note
Layout
MTD Products AG
Industriestraße 23
D-66129 Saarbrücken
Lawn Trimmer
LYCOS E/XXX X
41XXXXXX650
XXXXXXXXXXX
1 Guaranteed sound level
2 Protection class/IP code
3 CE mark
4 Manufacturer
5 Device group
6 Model name
7 Model number
8 Serial number
9 Power
10 Engine speed in rpm
11 Weight
12 Rated voltage, current type, frequency
20
xxx
XXX W
XXXX
XXXX min -
1
XX kg
230V~ 50Hz
13 Disposal instruction
14 Year of manufacture
Assembly
Assembling the grass trimmer
Push the grass trimmer upper and lower parts
together until the connection audibly engages.
Fastening the protective cover
Position the protective cover on the grass trimmer
.
Fix the protective cover with the fastening screws
.
Note
Before starting the device remove the cut
protector on the line cutter
Note
The grass trimmer can be used for cutting
small areas of grass
Operation
Risk of injuries due to the cutting tool.
Switch the motor o , wait until the cutting
tool comes to a standstill, and pull out
the mains plug before you make any
adjustments to the device.
Operating elements
1 Top handle
2 Unlocking button
3 Cable strain-relief
4 Middle handle
5 Locating knob
6 Line knife
7 Line spool
8 Press knob for line adjustment
9 On switch
10 Cable
11 Protective cover
Intended use
.
and edge cutting
WARNING!
.
Publicidad
Capítulos
