TechniSat DigiCorder HD Serie Manual De Instrucciones página 16

> To access the timer overview, fi rst call up the main menu by pressing
the Menu button.
> Use the arrow keys up/down to select the entry Manage timer and con-
fi rm by pressing OK. The sub-menu Manage timer will be displayed.
> Use the arrow keys up/down to highlight the line Set highlighter, confi rm
by pressing OK.
If, when programming, multiple timer events clash, meaning the timer
cannot be correctly set, the overlaps are highlighted in red.
Change timer programming
> To change an existing timer setting, access the timer overview function.
> Subsequently, use the arrow keys up/down to highlight the timer event
you wish to change.
> Press the green function key Change to go to the settings of the high-
lighted timer. Make the changes as described.
> Use the arrow keys up/down to highlight the additional window dis-
played: Type, before you save to the timer.
> By pressing the OK key a window with the available timer types will
open.
> Now use the arrow keys up/down to select the desired timer type.
> To accept the timer type, confi rm by pressing OK.
> Press the green function key Save, to save the data in storage.
Delete timer programming
> To delete an existing timer setting, access the timer overview function.
> Subsequently, use the arrow keys up/down to select the timer to be
deleted.
> Press the yellow function key Delete. A message will be displayed: "Do
you really want to delete this timer?"
> Use the arrow keys left/right to select Yes.
> To delete the timer, confi rm by pressing OK.
Channel new timer event
> To channel a new timer event, use the arrow keys up/down to highlight a
blank line in the menu Timer overview.
> Press the green function key New to call up the input window to channel
a new timer event.
> Use the arrow keys up/down to highlight the additional window dis-
played: Type.
> By pressing the OK key a window with the available timer types will open.
16