3.8 Sleep mode
Press SLEEP key to toggle the energy saving mode. Sleep
function is available in COOL, HEAT and AUTO mode.
3.9 When the unit is faulty, alarm is triggered and error code is
displayed (kindly refer to Error code table).
4.
Installation of LCD Remote Control
4.1 Accessories
The following accessories are included together with this
manual. If any part is missing, contact your dealer immediately.
a) Remote controller
b) Philip screws (2 pcs)
4.2 Step-by-step guide
First, open up the casing of the LCD remote controller into its
top and bottom case using a screwdriver. To do this, insert the
screwdriver into the lower slot and slide it in the outward direction.
4.3 Fix the bottom case onto the wall with the two wooden screws
provided.
4.4 Fasten the top and bottom case into place. Hook the two upper
claws into their respective slots and snap into the lower part
shut.
Lower slot for
LCD casing
OM-APW04A-1205-McQuay
LCD Remote
(Top case)
2 x Wooden
screw
LCD Remote
(Bottom case)
4
4
Connection at
main board
Connection wires
6/5/06, 8:32 AM