Declaration Of Conformity; Safety Instructions; Intended Use; Items Supplied - Hilti TE DRS­4-A Manual De Instrucciones

1.4 Declaration of conformity

We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration of conformity can be found at the end of this documentation.
The technical documentation is filed and stored here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety

2.1 Safety instructions

▶ Observe all safety instructions in this documentation and in the documentation of the Hilti rotary hammer
drill.
▶ Use respiratory protection to keep residual dust away from the face and airways when drilling and when
servicing the tool or accessories.
▶ Always use the side handle on the Hilti rotary hammer drill, even when the dust removal module is fitted.
▶ Picking up materials hazardous to the health (e.g. asbestos) is not permissible.
3 Description
3.1 Overview of the product
Suction head
@
Stroke limiter
;
Depth gauge
=
Dust container with filter
%
Dust container release
&

3.2 Intended use

The TE DRS­4­A (01) dust removal module is an accessory for the Hilti TE 4­A22 (02) rotary hammer drill. It
collects a high percentage of the dust and it attaches quickly and easily to the rotary hammer drill. The dust
removal module has a built-in extractor fan. This fan is driven by its own motor. When the rotary hammer
drill is switched on the dust removal module draws its electric power from the rotary hammer drill's battery.
The dust removal module is not suitable for working on metal and wood.
Conditions: TE DRS-4-A T1
The TE DRS-4-A T1 satisfies the requirements of OSHA 1926.1153 Table 1.

3.3 Items supplied

Dust removal module, operating instructions.
Note
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.group.
4 Technical data
Rated power input
Rated power input
Weight
Operating stroke
TE-C hammer drill bits used, ⌀
Printed: 07.09.2017 | Doc-Nr: PUB / 5200594 / 000 / 04
1
(
)
+
§
DRS release button
Guide (tool)
Electrical interface on the tool, with sliding
cover
DRS electrical interface
TE DRS-4­A
60 W
250 ℓ/min
1 kg
(2 lb)
≤ 96 mm
(≤ 3.8 in)
5 mm ...19 mm
(3/16 in ... 5/8 in)
Spare parts,
English 7