ENGLISH
5.3 Factory Reset
You can set the Powerplug Adapters back to the factory default settings if required.
The option "Factory Reset" is protected with a password. The password for a factory
reset is: "betera", with small characters. (This password cannot be changed!)
A.
Start the Powerplug Configurator with the Desktop shortcut or through the Start
Menu. The main program window will appear.
B.
Click "Next" to start searching for connected Powerplug Adapters.
C
C.
Select the "PC Adapter" and click the "Factory Reset" button.
Note:
You can reset only 1 Powerplug Adapter at a time.
If you select a Powerplug Adapter listed in the section "Other Adapters", the
"Factory Reset" button is not shown. You can reset the selected adapter
through the Advanced Configuration described in Chapter 6.2.
45
C