EAS ELECTRIC EMV70DGN Manual De Instrucciones página 31

REMOVING THE DOOR FROM OVEN (OPTIONAL) TYPE-2
Disassembly of oven door components
1. To remove the door, open the door
to the maximum angle.Then pull
the buckle at the door hinge
backward.
2. Close the door to an angle
approximately 30°. Hold the door
with one hand on each side.
Lift up and slowly pull the door out
from the oven.
3. Open the door rotation bracket
assembly, refer the action in the
following picture.
4. Lift up the door outer glass and pull
it out, then take the door middle
glass out in the same way.
WARNING:
Don't pull the door forcibly and prevent the
glass breakage during the dismantling process.
WARNING:
Note that the hinge springs could loose and
cause personal injury.
WARNING:
Do not lift or carry the oven door by the door
handle.
15
30º
V.4