Change Fine Filter
► If the suction power is no longer sufficient in spite of a filter cleaning, the fine filter must be chan-
ged.
► In general, the fine filter should be changed every 2 years.
Do not clean the fine filter manually (e.g. with compressed air, brush, water, etc.), as this leads to
damage of the filter material!
When installing the fine filter please ensure that it is positioned correctly, otherwise leakages may result.
See the assembly instruction at the end of the instruction manual, which is also attached to the new fine
filter.
Spare Parts
You can find components subject to wear and the spare parts on the spare part list
in the internet at www.renfert.com/p918.
Enter the following item number: 29342000
The components excluded from the warranty (such as consumables or parts sub-
ject to wear and tear) are marked on the spare part list.
Disposal Information
Within the European Union, units with this symbol should not therefore be disposed of in unsort-
ed domestic waste.
Please contact your local authorities for more information on proper disposal.
- 5 -
EN
Subject to change