5.0 (EN) Configuring the EM4591 manually
It is possible to configure the repeater manually instead of using the WPS button. If
you want to configure the repeater manually:
1. Connect the EM4591 to a wall outlet.
2. Wait for the signal indicator to turn green.
3. Connect to the EM4591 WiFi SSID Eminent_repeater or Ethernet cable.
4. Launch the internet browser from your computer/tabet/smart phone.
5. You will be redirected to the EM4591 repeater's user interface. (If in any case it
doesn't, type http://10.0.10.254 in your internet browser and then hit Enter.
6. Click "Quick connect" as shown in the following image:
7. The first step of the wizard appears, where you need to select the wireless
network you wish to connect to by clicking
8. In the next step you will need to enter the WPA Passphrase of the Wi-Fi network
you wish to connect to.
as shown in the following image:
12 | M
ULTILINGUAL