Sanyo FXCD-1100 Instrucciones De Operación página 12

ATP (AUTO TRAVEL PRESET) OPERATION
The Auto Travel Preset function searches for and memorizes the 6 strongest stations in one of the two bands
(FMI, AM) in order of signal strength.
This feature is useful when you are driving in an unfamiliar location and want to memorize local stations without
changing the standard preset stations.
A total of 12 stations (6 FM and 6 AM) can be programmed.
S To set the stations . . . . . . . . . . . . .
S Quick Tuning of ATP Stations
S To scan programmed stations
Notes
S If no station can be received, - - -" appears in the display.
S If fewer than 6 stations can be received, the system will memorize as many stations
as possible, then select the one memorized first.
S If ATP mode is selected in FMII band, FMI ATP mode is selected.
PRESET SCAN BUTTON OPERATION
This function scans each of the preset stations stored in the selected band (both manual preset and auto travel
presets).
1 Select the desired band or ATP mode.
➀
Press the BAND button
the ATP mode.
2 Press the P.SCN button ➄. The system will select and receive each preset station for 5 seconds.
3 To stop scanning and retain the station currently selected, press the P.SCN button ➄ again during this five se
cond period.
1 Select the desired band.
2 Press and hold the ATP button
pears in the display.
When the stations have been memorized, scanning stops and the
strongest station is selected.
. . . . 1 Select the desired band.
2 Press the ATP button if the ATP" indicator does not appear in the dis
play.
➃
3 Press button for less than 1 second to select the desired ATPpreset.
Each time the ATP button is pressed, the next ATP preset is selected.
If a total of six stations cannot be preset - - -" will be displayed for the
empty channels.
. . . See PRESET SCAN BUTTON OPERATION".
. . . . . . . . . . . . . . . . . . . .
for FMI, FMII, or AM. Press the ATP button
-10-
4
. . . . . . . . . . . . . .
➃
for more than 2 seconds. ATP" ap
1, 4, 5
➃
for less than 0.5 seconds to select