General Operation; Turning The Power On - Sanyo FXCD-1100 Instrucciones De Operación

GENERAL OPERATION

5

TURNING THE POWER ON

Install the front panel and press the ON/OFF button
TURNING THE POWER OFF
➀
Press the ON/OFF button
The button dims when the power is off (ACC on).
ELECTRONIC CONTROLS
➁
Press the SELECT button
➂
Turn the jog dial to adjust the selected function ; bass, treble, balance, fade, or volume.
Note
While no other mode is displayed, the jog dial adjusts the volume.
MODE MODE
VOL (volume)
bAS (bass)
TRE (treble)
bAL (balance)
FAd (fader)
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
to stop the current operation.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
to select the audio functions as shown in the table below.
Jog Dial Operation
Turned left
Decreased Increased
Decreased Increased
Decreased Increased
Shifted to left Shifted to right
Shifted to front Shifted to rear
-7-
7 6 4 1
2
➀
when ACC is on.
Turned right
3
1
2, 3