Arneg Perth 6 P Guía De Instalación Y Manejo página 71

19 Insert the spring-loading spanner into one of the holes of the lower
pin, rotate in an anti-clockwise direction so as to insert the loading pin.
When the operation has been completed, the door should close
automatically. If it is not sufficiently loaded, move the loading pin by
one hole..
HINGE GROUP:
1) Galvanised block for curved spring
2) Threaded galvanised block for curved spring
3) Burnished screw M4x8
4) Hook-shaped square-section spring
5) Lower pin-guide sleeve
6) Universal door-block bracket
7) Screw
8) Screw
9) Lower brass
10) Universal galvanised Seeger ring
11) Square spring lower pin w/ radial holes
12) Spring-loading pin
PLATE GROUP:
1) Door-blocking spring
2) Plate fixing stainless steel screws
3) Blanked plate
4) Ratchet for peg
5) Pin for door-blocking spring
6) Nylon under-plate
05060214 00 09-2021
Perth 6P - Perth 6P 1E
English
61