Technical Data; Installation - Electrolux EUF27393X Manual De Instrucciones

7. To prevent the water overflowing from
the drip tray dry with a sponge.

TECHNICAL DATA

Dimension of the recess
Rising Time
Voltage
Frequency
The technical information are situated in the
rating plate on the internal left side of the
appliance and in the energy label.

INSTALLATION

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
LOCATION
The appliance should be installed well away
from sources of heat such as radiators,
boilers, direct sunlight etc. Ensure that air
can circulate freely around the back of the
cabinet. To ensure best performance, if the
appliance is positioned below an overhang-
ing wall unit, the minimum distance be-
tween the top of the cabinet and the wall
8. The defrosting process ends when the
9. Move the appliance to the original posi-
10. Clean and dry the inside of the appli-
11. Connect the mains plug into the mains
12. Switch on the appliance.
Height
Width
Depth
unit must be at least 100 mm . Ideally, how-
ever, the appliance should not be posi-
tioned below overhanging wall units. Accu-
rate levelling is ensured by one or more ad-
justable feet at the base of the cabinet.
If the cabinet is placed in a corner and the
side with the hinges facing the wall, the dis-
tance between the wall and the cabinet
must be at least 10 mm to allow the door to
open enough so that the shelves can be re-
moved.
water stops dripping. It may take sever-
al hours if the problem started long be-
fore.
tion.
ance.
socket.
1800 mm
600 mm
650 mm
20 h
230-240 V
50 Hz
electrolux 33