babymoov Swoon Motion Instrucciones De Uso página 24

EN.
General diagram
a. Back
b. Back handle
c. Seat base
d. Seat base handle
e. Early-learning arch
f. Rotating base
Base
1. Start/stop button
2. + and – button
3. Rocking indicator lights
4. Music button
Back (a)
• Pull on the handle of the back (b).
• Choose the desired inclination position.
Seat base (c)
• Pull on the handle of the seat base (d).
• Choose the inclination position desired.
• Insert the early-learning arch (e) in its base.
• Adjust the early-learning arch (e) to the desired position.
• To remove the early-learning arch (e) pull it upwards by pressing on the tab.
• Hold the rotating base firmly (f)
• Pivot the seat (g) to the desired position.
• Assemble the shoulder straps (i) with the waist straps (j).
• Insert the straps assembled (i and j) in the crotch harness (k) until you hear a "click".
• Pass each shoulder strap of the safety harness (h) in the slits of the pressure reducing cushion (l).
• To facilitate the removal or insertion of the cover (m) fold back the back (a) and the seat base (c) with the help of the
handles of the seat base (d) and the back (b).
• Taking off: open the zip under the cover (m). Take off the cover (m).
• Putting on: open the zip under the cover (m). Insert the handles of the seat base (d) and the back (b) in the slits of the
cover (m).
Connection to the mains
• Insert the cable (q) in the jack port (o).
Working with batteries (not supplied)
• Provide yourself with a crosshead screwdriver (not supplied).
• Open the battery housing (p).
• Insert the batteries respecting the polarity.
• Reclose the battery housing (p).
24
COMPOSITION
g. Seat
h. Safety harness
i. Shoulder straps
j. Waist straps
k. Crotch
l. Pressure reducing cushion
5. Volume / select button
6. Timer button
7. Movement detector button
INSTRUCTIONS FOR USE
A. INCLINATION
B. EARLY-LEARNING ARCH (e)
C. ROTATION 360°
D. SAFETY HARNESS (h)
E. PRESSURE REDUCING CUSHION (l)
F. PUTTING ON AND TAKING OFF THE COVER (m)
G. SWITCHING ON
SWOON MOTION ∙ Instructions for use
m. Cover
n. Latch
o. Jack port
p. Batteries housing
q. Cable and adaptor
(mains connection)
Input: 240 V / 60 Hz
Output: 5 V / 1 A
Works with 4 C 1.5 V batteries
(not supplied)