Pret a Pousser NANO GRADEN Manual De Instrucciones página 6

nglish
english
SETTING UP NANO GARDEN IN 5 MINUTES
1
Assemble the two pieces of
the rod by screwing them
Put the clips around the
cable and the rod.
2
Place the lamp on the
metal rod, 5cm above
the pot.
Once plugged in, your lamp will
light up and is automatically set
to a 'summer' light intensity and
a 16h cycle. To modify these
settings, pair your smartphone to
your lamp (see next page).
3
Put the floater in the
pot.
The top side is the mounting
end and the bottom side is the
flat base. Fill in with water until
the top side is slightly above
the pot's rim.
10
4
Put the nutrient bag
in the water.
No need to open it, just put it
in the water directly.
5
Insert the pod into the
floater.
6
Sow the seeds.
Open the seedbag and put the
seeds in the pod.
SUCCESSFULLY MANAGING YOUR LAMP USING THE MOBILE APP
Smart light control
Tips and tricks all along the growth of your plant
Access to tutorials and information about your plant
Pair the lamp to your smartphone using Bluetooth TM
Plug in your lamp. Bluetooth® is automatically activated.
1
Activate Bluetooth® on your smartphone.
2
Download the Prêt à Pousser app and create an account.
3
The app will ask which Nano Garden model you own and the plant you have
4
chosen to grow.
Once you have created/selected your Nano in the app, you will be able
5
to adjust your light at any time by clicking on the „Adjust light" button!
Automatic mode: for adjusted lamp settings fitted
to the plants you are growing.
By choosing the automatic mode, the mobile app will choose the best light
intensity and duration for the plant you have registered.
Manual mode: for a lamp with personalised
intensity and duration setting.
For example, Nano Garden can sync to your lifestyle (and is the perfect light
to wake up to in the morning). An alert will appear if the chosen mode would
hinder the growth of your plants.
englis
english
11