Controls; Instruments Dashboard - IPC Gansow 1010 E Manual De Instrucciones

CONTROLS

5.1 5.1 5.1 5.1
5.1
1:Brake locking pedal
Pressing it with the service brake, 2, disables the latter and engages the
parking brake. To release the parking brake, press service brake 2 and
the brake locking pedal will snap into its rest position.
2:Service brake pedal
Operate this pedal to stop the machine during operation.
3:Flap lifting pedal
Use the pedal when you are tackling bulky but light wastes. Do not
keep the pedal pressed down unless it is strictly necessary.
4:Accelerator pedal
Operate this pedal to regulate the speed of the machine.
5:Right side brush control lever
By pulling and pushing down the side brush lever, the brush moves
to work position and starts spinning.
To stop the side brush at the end of your work, push the lever back to
its initial position.
5-A:Left side brush control lever
As above in the double side brush version.
6:Centre brush control lever
By pushing the lever back (to ON), the centre brush moves to work
position and starts spinning.
To stop the brush at the end of your work, push the lever back to OFF.
7:Seat adjustment lever
This lever adjusts the position of the seat in the position best suiting
the operator.
8:Battery disabling key
If necessary or in hazardous situations, this key
disables ALL of the machine's functions by cutting off the
power supply.
Before using the key to enable the battery again, remember to turn
of all the parts that are on (side brush, centre brush, fan, etc.) and to
take your foot off the accelerator pedal in order to prevent the machine
from the starting up abruptly and jolting forward.
9:Battery charger socket
Connect a battery charger with a capacity of 24V/30A.
Do not use chargers with different capacities.
ENGLISH (Translation of original instructions)

5.2 - INSTRUMENTS DASHBOARD

Fig.2
1:Advance switch
By operating this switch, you select the direction of the machine.
WARNING: before operating this switch, remember to take your foot
off the accelerator, otherwise the machine will not manage to change
direction.
COMBINED INDICATOR LIGHTS:
Indicator light A: the direction is forward
Indicator light B: the direction is reverse
2:Function switch
This switch allows you to select the work functions of the machine.
Push the switch forward to turn
hold the switch back to operate the motor vibrator for cleaning the
filter.
COMBINED INDICATOR LIGHTS
Indicator light C: the suction motor is working.
Indicator light D: the centre brush is working.
Indicator light E: the filter shaker motor vibrator is working.
3:General key switch
This enables or disables all of the machine's functions.
COMBINED INDICATOR LIGHT
Indicator light F: power on.
4:Button to operate the horn.
Press this button to operate the horn.
Indicator light G: the side brush is working.
Indicator light H: the batteries are being charged. See the Routine
Maintenance section.
Indicator I: this indicates the total number of hours the machine has
worked.
Fig.3
on the suction motor. Push and
Pag. 5