Then rub in the olive oil and subsequently wipe the surface with a clean cloth so that the finish is not oily. This way you
will ensure that the material is protected from dirt and other aggressive harmful substances because the surface will be
covered with a temporary food-safe protective layer.
The olive oil film also makes subsequent polishing and removal of fingerprints and the like much easier. Repeat this
procedure from time to time when you clean your barbecue.
IMPORTANT INFORMATION
You may have purchased a protective cover for your barbecue. To protect your investment, we recommend that you
cover the barbecue with the protective cover whenever it is not in use. However, make sure to put on the protective
cover only when your barbecue has cooled down and is clean and dry. It may be necessary to use a protective cover.
Caution! Putting a protective cover on your barbecue while it is warm, wet or dirty may lead to heavy rusting.
For this reason, your barbecue must always be cool, clean and thoroughly dried before you put on the protective
cover. This is especially important before long periods of disuse, e.g. during winter storage.
Follow these maintenance and care tips thoroughly in order to preserve the quality of your barbecue for a long time.
Take good care of your investment and it will serve you well for years to come.
GAS SAFETY
For LP gas grills, the LP gas supply tank to be used must be: manufactured in accordance with an established European
Directive relating to gas cylinders.
• The tank should be 35.3 cm in diameter and 45.72 cm tall and be equipped with a Type-I fitting.
• The tank supply system must be arranged for vapor withdrawal.
• The tank used must include a collar to protect the cylinder valve.
Do not operate the gas grill indoors or in any enclosed area. If the gas grill is not in use, the gas must be turned off at
the supply tank and store the tank in an upright position in a cool, well-ventilated outdoor location away from your grill
or any other heat source.
When checking for gas leaks, do not use an open flame. Use a soapy water solution and apply it to the pipe joints and
fittings with a brush and check for bubbles. Check flexible hoses for cuts and wear that may affect the safe operation
of the grill. Only the factory supplied hose and regulator must be used. Use only replacement regulator and hose
assemblies specified by the manufacturer.
LP tank should be securely locked by the patented safety tank ring at all times. An unlocked tank may fall or tilt which
can cause injury or property damage. It is recommended to lock the tank all the time.
After positioning the tank in the opening, lower the safety tank ring to lock the tank. Use only 20lb (9.07 kg) gas tank.
WARNING: The pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be
used. Replacement pressure regulators and hose assemblies must be those specified by the outdoor cooking gas
appliance manufacturer.
EN-25