Product Information - Siemens SIMATIC ET 200eco PN Serie Información Del Producto

SIMATIC
ET 200eco PN
Use of the ET 200eco PN in zone 2/zone 22 hazardous areas

Product Information

Siemens provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. Siemens' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the internet if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please visit
(https://www.siemens.com/industrialsecurity).
Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly
recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use
of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to
cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS Feed visit
(https://www.siemens.com/industrialsecurity).
Introduction
This product information contains important notes on the ET 200eco PN distributed I/O device for installation in zone 2/zone
22 hazardous areas.
Approved ET 200eco PN distributed I/O devices
You can find the EU prototype test certificate with the approved ET 200eco PN I/O devices on the Internet at the following
link: Service & Support (http://support.automation.siemens.com/WW/view/en/71748103)
Table 1 Approved ET 200eco PN distributed I/O devices
Designation
Digital input devices
8 DI DC 24V 4×M12
8 DI DC 24V 8×M12
16 DI DC 24V 8×M12
Digital output devices
8 DO DC 24V/1,3A 4×M12
8 DO DC 24V/0,5A 4×M12
8 DO DC 24V/1,3A 8×M12
8 DO DC 24V/2,0A 8×M12
16 DO DC 24V/1,3A 8×M12
Digital input/digital output device
8 DIO DC 24V/1,3A 8×M12
Analog input device
8 AI 4 U/I + 4 RTD/TC 8×M12
8 AI RTD/TC 8×M12
© Siemens AG 2013 - 2021. All rights reserved
A5E03879075-AB, 02/2021
Article number
6ES7141-6BF00-0AB0
6ES7141-6BG00-0AB0
6ES7141-6BH00-0AB0
6ES7142-6BF00-0AB0
6ES7142-6BF50-0AB0
6ES7142-6BG00-0AB0
6ES7142-6BR00-0AB0
6ES7142-6BH00-0AB0
6ES7147-6BG00-0AB0
6ES7144-6KD00-0AB0
6ES7144-6KD50-0AB0
5