Programming - Vimar CLIMARADIO Manual De Instrucciones

7. PROGRAMMING

Make the electrical connections, install the appliance and lastly insert
the batteries.
• Setting date and time
Before starting to program the timer-thermostat, it is advisable to set
the current date and time.
- Press the button; the device's display will show only the arrow
at the top indicating the date and time to set.
- Using the button, move the arrow onto the current date.
- Press the button to confirm and pass on to set the time; the
two digits indicating the hour will start blinking.
- Set the current hour with the
- Press the button to confirm and pass on to set the minutes;
the two digits indicating the minutes will start blinking.
28 - ENGLISH
button.
- Set the current minutes with the
- Press the button to confirm and quit.
• Setting the temperature levels
The temperature levels are the temperatures that will later be entered
in the automatic program that will be created. The timer-thermostat
has 3 temperature levels T1, T2 and T3 as well as T antifreeze.
- Press the button; the device's display will show only T * (anti-
freeze) with the reference value blinking.
- Using the button, set the desired antifreeze temperature.
- Press the button to confirm and pass on to set the tempera-
ture T1; the display will show the reference value blinking.
- Using the button, set the desired temperature T1.
button.