Vimar CLIMARADIO Manual De Instrucciones página 36

• Switch-off
- Press the button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the button to confirm.
To switch the timer-thermostat back on, press the
• Timed switch-off
- Press the button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the button again; the display will show two blinking
digits indicating the number of hours (h) to set.
- Using the button, select the desired number of hours (from 1 to
99) and then press the
The timer-thermostat will then stay off for the set period of time after
32 - ENGLISH
button.
button to confirm.
which it will switch on going into the prior operating mode (manual
or automatic).
• Antifreeze
- Press the button; the display will show the OFF symbol
blinking alongside the temperature.
- Press the button again; the display will show two blinking
digits to set if you want timed switch-off for the device.
- Press the button a third time; the display will show 3 blinking
digits indicating the antifreeze temperature to set (from 04.0 °C to
15 °C).
- Using the button, select the desired temperature and then
press the button to confirm.
With the heating system off, the display will show the antifreeze
symbol next to the measured temperature.