Lamp Replacement; How To Fix The Feet - Klarstein ST. MORITZ Manual De Instrucciones

LAMP REPLACEMENT

Screws
• Disconnect the device from the mains and let it cool down.
• Loosen the screws on the front (near the decoration). Lift the wooden
decoration, you will see two light bulbs.
• Change them with max. 25 W bulbs.

HOW TO FIX THE FEET

The device is delivered with the feet dismounted to avoid damage during
transportation. After unpacking, attach the feet as follows:
1
Remove the feet from the packaging
and align them with the holes on the
bottom of the unit. Repeat this step for
the other 3 feet.
2
Screw the feet in place using the
screws provided and a screwdriver.
Repeat this step for the other 3 feet.
EN
13