ACME SP107 Instrucciones De Uso página 2

eN
Bluetooth Tower Speaker
User manUal
Contents
Speaker unit
Stereo cable
Manual
main features and functions
• Supports Iphone, Ipad and alI music devices with Bluetooth
and Line-out function, Support MP3/MP4/PC/mobile phones
• iPad/MlD/iPhone/Smart phone holder
• Vol+/Vol-/Next/Prev/Play/Pause/Mode/Paring Button
• Output: 2 x 10 W
• Bluetooth 2.1 +EDR (Enhanced Data Rate)
• Support A2DP, AVRCP
• Frequency: 20 – 20 000 Hz
• Distance: <10 m
• Power input: AC 220-240 V/50 Hz
Product Diagram
4 5 6
3
1. Previous track 5. Mode/pairing
2. Play/pause 6. Volume+
3. Next track 7. 3.5 mm line in jack
4. Volume-
Turn On/OFF the tower speaker
1. Connect the power cable to power socket, and
press the power switch to the on position. the tower
speaker will be powered on.
2. Press the power switch to OFF position, the tower
speaker will be powered off.
Pairing your mobile Bluetooth device to the
tower speaker
Pairing instructions may differ depending on the device
you are using. Please refer to your device's user manual for
further information.
1. Pairing
a. Make sure that your mobile device is within 1 meter
of the speaker when trying to pair and that the tower
speaker is powered on and in bluetooth mode.
b. If the tower speaker is not connected to any mobile
device, it will enter pairing mode automatically. If the
tower speaker has been connected, press and hold
the (5) Pairing button for 3 seconds and bluetooth
speaker will enter the pairing mode
c. Open the Bluetooth settings in your mobile device
and select Search/Scan for devices. Your mobile
device will begin to search for Bluetooth devices.
d. You will see the name "SP107" appear In the device
7
Iist. Select it to pair, and if a password or PIN is
needed, enter the numbers "0000". Then select
"SP107" and press "CONNECT"
1. reconnecting
a. The tower speaker will automatically connect to the
Iast Bluetooth device that was paired when powered
on.
b. If the tower speaker does not automatically
reconnect, make sure that your mobile device is
within at Ieast 1 meter of the tower speaker and
access the Bluetooth settings in your mobile device.
Select "SP107" from the device Iist, If your device is
not Iisted, start from the beginning of "Pairing your
mobile Bluetooth device to the tower speaker"
instructions above.
Playing music
1. Make sure that your Bluetooth A2DP (audio/music)
mobile device is paired with the tower speaker.
2. Begin playing music on your mobile device or simply
press the (2) Play/pause button and you should hear
the music playing through the tower speaker, If the
music volume is Iow, increase the volume on the
tower speaker first, then adjust your mobile device's
volume.
3. You can control the music playing directly from the
tower speaker.
a. Next track- short press the (3) Next track button.
b. Previous track- short press the (1) Previous track
button.
c. Increase volume- short press the (6) Volume +
button.
d. Decrease volume- short press the (4) Volume -
button.
e. Play and pause switch- short press the (2) Play/
pause button.
lIne In function
1. Turn on the tower speaker.
2. Connect the tower speaker to music player such as
MP3/MP4/PC/Mobile phone to AUX line.
3. The tower speaker will enter AUX mode and play the
music of player through AUX. If the tower speaker
dose not enter AUX mode, press the (5) Mode button
to select the AUX mode.
Waste Electrical and
Equipment (WEEE) Symbol
The use of the WEEE symbol indicates that this product
may not be treated as household waste. By ensuring this
product is disposed of correctly, you will help protect the
environment. For more detailed information about the
recycling of this product, please contact your local authority, your
household waste disposal service provider or the shop where you
purchased the product.
Electronic