Setup; Pairing Your Headset - Gioteck EX-01 Manual De Instrucciones

pairing your headset

1. Within the Settings' menu,
press X on Accessory Settings.
4
SECONDS
4. At the next screen, prepare your
headset (from off) to be paired
with the PS3™ by holding down
the power button continuously
until the LEDs are flashing
alternate Blue & Green.

04 | SETUP

2. Press X on the icon labelled: 3. Press X on Yes to register your
Manage Bluetooth® Device. Bluetooth® Device.
5. Press X to Start Scanning. Once 6. Locate PS3 EX-01 from the list
the scan is complete, the PS3™ of available devices and press X.
will recognize all Bluetooth®
wireless technology devices
devices within range.
7. Press X to enter 0000 (four zeros) 8. You will be taken to a new screen
as the Pass Key and press X on OK. stating: Register completed.
10. Scroll down and press X 11. Choose PS3 EX-01 as your input
on Audio Device Settings. and output device from the lists.
Press X to confirm your choices.
9. Press twice on your controller
to go back to Accessory Settings.
12. Scroll down and press X on OK.
Your EX-01 Bluetooth® Headset
is now ready to use...enjoy :)
SETUP | 05