Trust SMART Home APIR-2150 Manual Del Usuario página 6

APIR-2150 WIRELESS MOTION SENSOR
EN
8. Set horizontal detection range
The horizontal detection range of the sensor is maximum 110° and minimum 20°. Remove, reposition
or adjust the size of the plastic screens to adjust the angle.
9. Mount the motion sensor
Affix the holder at any desired location and place the motion sensor into the holder.
10. Set detection direction
Loosen the clamp screw and point the motion sensor to your desired position. When satisfied tighten
the clamp screw. The sensor needs 30 seconds to analyze its environment, before
it becomes operational.
11. Delete code from Trust SmartHome receiver memory
Read the receiver's manual for the single code delete procedure. Slide the LEARN switch from [SET] to
[DEL] to send an OFF-signal.
2