Replacing Dust Bag - IRIS IC-SB1U Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING AND MAINTENANCE
WARNING: Unplug the power plug from the electric socket before emptying the dust bag

Replacing Dust Bag

Please empty the dust bag frequently . Using the disposable
dust bag while full can cause the suction to decrease and
noise to increase .
1. Remove the dust cover.
Push in the right and left cover buttons to remove the dust
cover .
2. Remove dust bag set.
Dust may fall . Remove the dust bag set over a trash can .
3. Dispose of the dust bag.
Pinch the corners of the disposable dust bag, remove it from
the bag holder, and throw it away .
Please do not throw away the dust bag holder .
4. Reassemble the dust bag set.
Insert the bottom of the dust bag holder into the disposable
dust bag . Be sure the bag slides all the way into the clips .
Be sure the bag is set so that it does not come off .
Disposable dust bags must
be used or the motor may
CAUTION
malfunction .
Do not force the clip open as this
could damage or break it .
5. Reassemble dust bag set in the dust bag chamber.
Insert the dust bag set firmly back into the main body in the
reverse order from how it was removed .
Make sure the disposable dust
bag is in the upright position for
CAUTION
use . Other orientations may allow
dust to leak out .
6. Attach dust cover.
Please press the cover into place until the left and right
buttons snap into place . Listen for a "clicking" sound .
Dust cover
Cover button
Dust bag set
Bag holder
Disposable dust bag
Bag holder
Disposable dust bag
Disposable
Bag holder
dust bag
Clips
Be sure the bag slides all
Dust bag set
the way into the clip.
Dust bag set
11
Replacement Disposable Dust Bag, (25 PC)
Please purchase replacement parts from IRIS USA, Inc .
Model number: FDPAG-1414
Sponge Filter
1 Refer to Cleaning and Maintenance (P13) steps 1-2 and remove dust bag
cover and dust bag set .
2 Pull out the sponge filter in the back of the dust bag set chamber .
3 Wash the sponge filter and dry well .
4 Attach the sponge filter . Insert the sponge filter in the back of the dust bag
set chamber .
5 Refer to Cleaning and Maintenance (P13) steps 5-6 and attach the dust
bag set and dust cover .
After rinsing the sponge filter, place it in a well-ventilated area or shade until fully dry .
WARNING
After cleaning, please make sure to attach the sponge filter before use to avoid damage to the
motor .
12

Publicidad

Tabla de contenido
loading

Tabla de contenido