Lcd Tv And Operating Buttons; Viewing The Back Side Connections; Control Buttons - CONTINENTAL EDISON CETVLCD26HDV3 Manual De Instrucciones

LCD TV and Operating Buttons

FRONT and REAR VIEW

Viewing the Back side Connections

1. HDMI 1: HDMI Input
HDMI Input are for connecting a device that has an HDMI socket. Your LCD TV is capable of
displaying High De nition pictures from devices such as a High De nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
2. RF Input connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
3. SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and
SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note: S-VHS signal is supported via the scart socket.
4. PC Input is for connecting a personal computer to the TV set.
Control buttons VIEW
English - 51 -

Control Buttons

1. Standby button
2. TV/AV button
3. Programme Up/Down
buttons
4. Volume Up/Down buttons
" " / "
Note: Press
buttons at the same time to view
main menu.
"