Timers; Setting Sleep Timer; Setting Programme Timers; Adding A Timer - CONTINENTAL EDISON CETVLCD26HDV3 Manual De Instrucciones

IMPORTANT: The factory default pin number is 4725,
if you change the pin number make sure you write it
down and keep it safe.

Timers

To view Timers menu, press MENU button and select
Settings icon by using " " or " " button. Press OK
button to view Settings menu. Use " " or " " button
to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after
a certain time.
• Highlight Sleep Timer by using "
• Use " " or " " button to set. The timer can be
programmed between Off and 2.00 hours (120
minutes) in steps of 30 minutes.

Setting Programme Timers

You can set programme timers for a particular
programme using this feature.
Press " " button to set timers on an event. Programme
timer function buttons will be displayed on the
screen.

Adding a Timer

• Press YELLOW button on the remote control to
add a timer. The following menu appears on the
screen:
Network Type: This feature is unavailable to be set.
Timer Type: You can select timer type as Record
or Timer.
Channel: Changes channel by using " " or " ".
Record Type: This item is unavailable to be set.
Date: Enter a date using the numeric buttons.
Start: Enter a starting time using the numeric
buttons.
End: Enter an ending time using the numeric
buttons.
Duration: Displays duration between the starting and
ending time.
Repeat: Sets a timer to be repeated as Once, Daily or
Weekly. Use " " or " " buttons to select an option.
Change/Delete: Sets the change/delete permission.
Playback: Sets the playback permission and parental
settings.
• Press GREEN button to save the timer. Press RED
button to cancel.

Editing a Timer

• Select the timer you want to edit by pressing "
or " " button.
• Press GREEN button. Edit Timer menu screen will
be displayed.
• When  nished with editing, press
save. You can press MENU button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing "
" or " " button.
• Press
• Select
timer. Select NO to cancel.
Recording Con guration
Select Recording Con guration item in the Settings
menu to con gure recording settings. The following
" or " " button.
menu is displayed for recording con guration.
The following options are available for adjustments:
Start Early (*)
You set recording timer's starting time to start earlier
by using this setting.
(*) Available only for EU country options.
End Late (*)
You set recording timer's starting time to start later
by using this setting.
(*) Available only for EU country options.
Max Timeshift
This setting allows you to set the maximum time
allowed for timeshifting. Duration options are
approximate and can change accordingly, depending
on the broadcast received.
Format Disk
IMPORTANT: Note that ALL the data stored on the
USB disk will be lost and then the disk format will be
converted to FAT32 if you activate this feature.
•If you want to delete all  les on the connected USB
hard disk drive or memory stick, you can use Format
Disk option.
• Also, if your USB disk malfunctions, you can try
formatting the USB disk. In most cases formatting
the USB disk will restore normal operation; however,
"
ALL the data stored on the USB disk will be lost in
such a case.
• Press OK button while the Format Disk option
is highlighted. A menu will appear on the screen,
English - 69 -
RED button.
YES by using " " or " " buttons to delete the
GREEN button to