Watching Recorded Programmes; Changing Image Size: Picture Formats - CONTINENTAL EDISON CETVLCD26HDV3 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

this case, OSD will display the programmed events
for recording.
Press
(STOP) button to cancel instant recording.
The following OSD will be displayed:
Select Yes by using " " or " " / OK buttons to cancel
instant recording.
Note: Switching to a different broadcast or source;
and viewing Media Browser are not available during
the recording.

Watching Recorded Programmes

In the main menu, use " " or " " buttons to select
Media Browser. Highlight Recordings Library item by
using " " or " " button and press OK button to enter.
Recordings Library will then be displayed.
IMPORTANT: To view recordings library, you should
 rst connect a USB disk to your TV while the TV is
switched off. You should then switch on the TV to
enable recording feature. Otherwise, recording feature
will not be available.
Select a recorded item from the list (if previously
recorded) by using " " / " " button. Press OK button
to view Play Options. Select an option by using " "
/ " " or OK buttons.
Available playback options:
Play from start: Plays the recording from the
beginning.
Resume: Recommences the recordings.
Play from offset: Speci es a playing point.
Note: Viewing main menu and menu items will not be
available during the playback.
Press
(STOP) button to stop a playback and return
to return to Recordings Library.
Slow Forward
If you press
recorded programmes, slow forward feature will be
available. You can use
Pressing
button consecutively will change slow
forwarding speed.
Changing Image Size: Picture
Formats
Programmes can be watched in different picture
formats, depending on the transmission received.
You can change the aspect ratio (image size) of
the TV for viewing the picture in different zoom
modes.
Press
SCREEN button repeatedly to change
the image size. Available zoom modes are listed
below.
Auto
When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in
the broadcast signal or the signal from an external
device, the TV automatically changes the ZOOM
mode according to the WSS signal.
When the
AUTO mode does not function correctly
due to poor WSS signal quality or when you want to
change the ZOOM mode, change to another ZOOM
mode manually.
16:9
This uniformly stretches the left and right sides of a
normal picture (4:3 aspect ratio) to  ll the wide TV
screen.
For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect ratio),
use the 16:9 mode to restore the picture to its
original shape.
English - 64 -
(PAUSE) button while watching
button to slow forward.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido