Dash Disassembly - Metra 95-7522B Instrucciones De Instalación

1. Unsnap and remove the trim panel above the glove box
and climate controls. This panel will include the climate
vents and hazard button. (Figure A)
Note: Do not cycle the key while the hazard button is
disconnected.
2. Unsnap and remove the trim from around the factory
radio. (Figure B)
3. Remove (2) Phillips screws, and (1) 10mm bolt securing the
factory radio, then unplug and remove.
Continue to Kit Assembly
2

DASH DISASSEMBLY

(Figure A) (Figure B)
1.800.221.0932
|
MetraOnline.com