Conceptronic CH3B2E Manual Del Usuario página 17

ENGLISH
The 'Basic Configuration Wizard' is shown on your screen. Here you can select the configuration for your
unit. The following options are available:
JBOD : The harddisks inside the unit are configured as single disks. You will have 2 volumes.
SAFE (RAID 1) : The harddisks inside the unit are configured as a mirror configuration.
You will have 1 volume with the size of the smallest HDD. The other HDD will be a
duplication of the 1
BIG : The harddisks inside the unit are configured as 1 drive with a total storage capacity of
both HDD's.
SAFE33 : The harddisks inside the unit are partially configured as mirror configuration (33%).
The remaining capacity is configured as BIG volume.
SAFE50 : The harddisks inside the unit are partially configured as mirror configuration (50%).
The remaining capacity is configured as BIG volume.
FAST (RAID 0) : The harddisks inside the unit are configured as 1 drive with a total storage capacity of
2 times the size of the smallest HDD.
Note : Some RAID explanations have different descriptions for JBOD and BIG volumes. In the Steelvine
Manager software, the above configuration explanations are valid.
st
harddisk.
17