Important Notice - Conceptronic CUPS600 Manual Del Usuario

English

Operation Test

Connect the UPS to the wall receptacle.

Push on the Main Switch to check the Green Line (

Connect your computer equipment with sockets of the UPS and pull
off the input power cable of the UPS from the wall receptacle to
check if the Line (
please check if alarm buzzer is beeping.

Try the field working condition by running some application programs
on your computer and repeating step.

Check if the UPS is initiated properly to support continuous operation.

IMPORTANT NOTICE:

Plug the UPS into the wall outlet to charge the UPS for over 8 hours before
using the UPS.
STORAGE:
Store at -15 to +30 °C (+5 to +86 °F), charge the UPS battery every six
months.
Store at +30 to +45 °C (+86 to +113 °F), charge the UPS battery every
three months.
) LED is flashing every 3 seconds. Meanwhile,
) LED is on.