geberit AquaClean Sela Manual Del Usuario página 10

EN
The wall-mounted control panel is without function
The following table will help you with troubleshooting if:
• the wall-mounted control panel is not functioning.
• the shower toilet cannot be controlled with the wall-mounted control panel.
In the event of malfunctions, follow the instructions in the shower toilet user manual.
Description of problem
LED display flashed red.
Touch-sensitive surface
does not respond when
touched.
LED display flashes red
twice, followed by a short
break.
How to clean the device
Caring for and cleaning smooth surfaces
All smooth surfaces can be cleaned hygienically with water and a mild, liquid cleaning agent
that is kind to the skin.
Aggressive and scouring cleaning agents can damage the surface. Only use mild,
liquid cleaning agents that are kind to the skin. The Geberit AquaClean cleaning set
(art. no. 242.547.00.1) includes a ready-made cleaning agent that is optimal for
cleaning all Geberit AquaClean surfaces.
10
Cause
Batteries flat
Malfunction has
occurred
Pairing unsuccessful
User interface
inactive
Fault clearance
▶ Replace the batteries.
→ See "Replace the battery", page 9.
▶ Check batteries in the wall-mounted
control panel.
▶ Check mains connection to the
shower toilet.
▶ Re-assign wall-mounted control
panel.
→ See "Assign wall-mounted control
panel", page 6.
▶ Re-assign wall-mounted control
panel.
→ See "Assign wall-mounted control
panel", page 6.
4550660107-1 © 11-2018
968.102.00.0 (00)