geberit AquaClean Sela Manual Del Usuario página 6

EN
How to use the device
Assign wall-mounted control
panel
Prerequisite
– The basic settings for the shower toilet
can be adapted to suit your individual
requirements via remote control. See
shower toilet user manual.
▶
Switch the shower toilet on and hold
the <+> sensor button for 10
seconds.
✓ The LED display lights up
permanently.
Result
✓ The shower toilet can be operated by
the wall-mounted control panel.
6
Using the anal shower
Prerequisite
– You are sitting down on the WC seat
ring.
▶
Touch the <Shower> sensor button
once.
Result
✓ The shower procedure starts and runs
for a few seconds. This can be
interrupted at any time by touching the
sensor button again.
4550660107-1 © 11-2018
968.102.00.0 (00)