Asus ROG Gladius II Wireless Manual De Instrucciones página 5

Customizing with ROG Armoury
For a more programmable buttons, performance settings, lighting effects, and surface calibration, download
and install the ROG Armoury from www.asus.com.
IMPORTANT! When you encounter a problem while updating the firmware, unplug the micro USB cable, then press
and hold down the left, right and scroll button on your mouse and replug the micro USB cable to restart the update.
NOTE: ROG Armoury does not support the Bluetooth mode when customizing your gaming mouse. Ensure your
gaming mouse is connected via USB cable or set to the RF 2.4G Wireless mode when using ROG Armoury.
Updating your gaming mouse and dongle
To update the firmware of your gaming mouse and/or dongle:
1. Connect the USB cable and/or USB dongle to your computer's USB port(s).
2. Launch ROG Armoury, then update the firmware of your gaming mouse. Please refer to the ROG
Armoury manual for more details on updating firmware.
Replacing the switches
NOTE: Refer to www.asus.com for the list of compatible switches.
If you want to replace the switches, follow the steps below:
Mouse switches
Switch socket
IMPORTANT!
• Ensure to install the switch with its button facing
the front of the mouse to the switch socket.
• Ensure that the switches are seated properly on
the switch sockets.
ROG Gladius II Wireless Gaming Mouse
Switch socket
NOTE: Ensure the rubber covers are pushed
in completely.
5