Machine Information; Safety Instructions - Ferm SGM1013 Traducción Del Manual Original

ADJUSTABLE SOLDERING STATION
The numbers in the text refer to the diagrams
on page 2.
WARNING
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result
in electric shock, fire and/or serious
injury. Keep the safety warnings and
the instructions for future reference.
Introduction
This appliance is designed for domestic use.
This soldering station is suitable for soldering on
printed circuit boards, soldering of plastic and
for burning work on wood and leather. All other
applications are specifically excluded.

1. MACHINE INFORMATION

Technical specifications
Voltage
Frequency
Power consumption: soldering station
Type of protection
Weight
Product information
Fig. A
1. Tip
2. Fixing nut
3. Soldering iron
4. On/Off switch
5. Holder
6. Soldering station
7. Temperature adjustment knob
8. Sponge
9. Accessory drawer

2. SAFETY INSTRUCTIONS

Explanation of the symbols
In accordance with essential applicable
safety standards of European directives
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING!
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
220-240 V~
50 Hz
1) Work area safety
48 W
a) Keep work area clean and well lit. Cluttered
I
or dark areas invite accidents.
0.6 kg
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body
is earthed or grounded.
3