General Safety Rules; Work Area; Electrical Safety; Personal Safety - Makita BHR200 Manual De Instrucciones

ENGLISH
SPECIFICATIONS
Capacities
No load speed (RPM)
Blows per minute
Battery Charger
Input
Output
Battery Cartridge
Voltage
Charging time
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.

GENERAL SAFETY RULES

(FOR ALL BATTERY OPERATED TOOLS)
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed below,
may result in electric shock, fire and/or
serious personal injury.
SAVE THESE INSTRUCTIONS

Work Area

1. Keep your work area clean and well lit. Cluttered
benches and dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep bystanders, children, and visitors away
while operating a power tool. Distractions can
cause you to lose control.

Electrical Safety

4. A battery operated tool with integral batteries or
a separate battery pack must be recharged only
Model
Concrete
Steel
Wood
Overall length
Net weight
DC24SA
BH2420
30 min.
A.C. only 50 Hz - 60 Hz
D.C. 7.2 V - 24 V
BH2433
24 V
60 min.
with the specified charger for the battery. A
charger that may be suitable for one type of battery
USA003-2
may create a risk of fire when used with another bat-
tery.
5. Use battery operated tool only with specifically
designated battery pack. Use of any other batter-
ies may create a risk of fire.

Personal Safety

6. Stay alert, watch what you are doing, and use
common sense when operating a power tool. Do
not use tool while tired or under the influence of
drugs, alcohol, or medication. A moment of inat-
tention while operating power tools may result in
serious personal injury.
7. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair, cloth-
ing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in mov-
ing parts.
8. Avoid accidental starting. Be sure switch is in
the locked or off position before inserting bat-
tery pack. Carrying tools with your finger on the
switch or inserting the battery pack into a tool with
the switch on invites accidents.
9. Remove adjusting keys or wrenches before turn-
ing the tool on. A wrench or a key that is left
attached to a rotating part of the tool may result in
personal injury.
2
BHR200
20 mm (3/4")
13 mm (1/2")
27 mm (1-1/16")
0 - 1,100/min.
0 - 4,700
316 mm (12-7/16")
4.0 kg (8.8 lbs)
DC24WA
BH2420
55 min.
BH2433
90 min.