Components / Presentation; Meaning Of Symbols; Intended Use - WISENT 23743393 Manual De Instrucciones

GBR

COMPONENTS / PRESENTATION

A
Protection cover
B
Display
C
Battery compartment screw
D
Belt clip
E
Battery compartment
F
LED indicator
G
Measurement needle
CONTENTS
Components / Presentation ................................................... 78
Delivery outline ..................................................................... 78
Introduction / Meaning of symbols ........................................ 79

Intended use.......................................................................... 79

Security instructions and warnings ........................................ 80
Preparation and operation ..................................................... 81
Use of building and wood humidity meter .............................. 81
Measurement preparation ..................................................... 82
Use of measurement functions .............................................. 82
LED light ................................................................................ 83
Closing automatism ............................................................... 83
Reference values for fuel wood and concrete / Screed ...................83
Solutions to problems ............................................................ 83
Maintaining and storing the product ...................................... 84
Technical data ........................................................................ 84
Waste management and reciclying ......................................... 85
DELIVERY OUTLINE
Please check immediately after unpacking the humidity meter, if
delivery is complete. Also, please check if all components are in good
condition for operation.
1 x Humidity meter for buildings and wood including protection cover
4 x Batteries 1,5 V
1 x Instruction manual
H
ON / Set key (button /
measurement switch)
I
LED key (on / off switch)
J
Help test
K
Measurement point B testing
L
Measurement point T testing
AAA, Micro, LR03
78
INTRODUCTION
Please carefully read the instructions before using this
i
measurement device and acquaint yourselves with
the operation of the measurement device. This manual contains
important information for operation and security instructions. The
failure to comply with security and operation instructions might
lead to product damage. This manual grounds on the Europe-
an standards and norms into force. If neccesary, these may be
overalpped with the guidelines and the laws from other countries,
specific for each country. Keep these operation instructions safe
and communicate them to third parties.

MEANING OF SYMBOLS

Text note. Please note and read.
i
WARNING! This symbol and signal indica
WARNING!
!
tes a significant potential danger which
might lead to death or serious injuries.
ATTENTION! This symbol and signal indi
ATTENTION!
!
cates a danger which might lead to slight
accidents.
This symbol indicates that the device complies with the
relevant safety standards.
INTENDED USE
The device is exclusively designed in order to measure the wood
and buildings humidity, such as concrete, plaster or morter,
buildings or woods, paper and cardboard. It is designed only for
personal use. The commercial use is strictly excluded! This device
is not a toy. The device may be used only as stated by this manual,
any other use shall be considered innapropriate. The innapropriate
use might lead to material damage and/or personal injuries. The
manufacturer and/or distributor shall not be responsible for the
damage resulted from misuse or innapropriate use.
GBR
79