Required Tools And Material; Prior To Installation; Installation; Installation Example With Anchoring To A Solid Wall Or Ceiling - sunfun 20030281 Manual Original

Required tools and material

The mentioned tools and materials are
not included in the scope of delivery.
This is non-binding information and
values for orientation purposes. The
quality of the material depends on the
individual conditions on site.
• Pencil/awning tools
• Ruler
• Drill
• Masonry drill
• Spirit level
• Wrench (17 mm and 19 mm)
• Screw driver
• Hexagon wrench (4 mm)
• Ladder (platform ladder)
• Tape measure

Prior to installation

– Check all screws for correct seat-
ing before using the awning.
– Carefully remove the awning from
the box and peel the polystyrene
trips off of the awning.
– Remove the plastic bags and plas-
tic bracket on the awning and place
the awning carefully on the ground
to prevent it from being damaged
from scratches or otherwise soiled
during work.

Installation

WARNING! Risk of injury!
Install the awning only with the
help of another person. The
awning is very heavy. Two peo-
ple are required when mounting
the awning in the wall hooks.
Do not try to mount the awning
by yourself. If the awning falls
off it can become damaged and
persons may be seriously
injured!
WARNING! Risk of injury!
The awning may only be
installed on a surface with suffi-
cient load bearing capacity. The
minimum installation height
must be 2.5 m.
Note: Each person should
have their own platform ladder
when installing the awning.
CAUTION! Risk of injury!
Make sure the ladders are posi-
tioned securely. Otherwise,
injuries can result. Only use lad-
ders that are suitable for such
installation work.
Note: Make sure the wall/ceil-
ing is level. Uneven walls/ceil-
ings may prevent the secure
mounting of the brackets (1).
Installation example with
anchoring to a solid wall or
ceiling
Determine the position of the
awning
– Select a suitable installation loca-
tion. Make sure that you maintain a
minimum distance of 20 cm above
GB
Français
131