Easypix GoXtreme Blackhawk+ Manual Del Usuario página 7

EN
6.WiFi Control
Before using the WiFi Control function, please install the app iSmart DV to your smartphone or
tablet PC. After turning the camera on, press the WiFi button for 2 seconds to activate or de-
activate the WiFi function. When the WiFi is turned on, the WiFi symbol will be shown on the
display. When the WiFi indicator turns green your camera is ready to be connected to your
smartphone or tablet.
Open the WiFi settings on your mobile phone to search for the camera device: GoXtreme from
the available wireless networks. (The password to complete the connection is 1234567890).
Start the iSmart DV software.
7. How to record videos and configure the recording settings
8-1. Video Recording
Switch to recording mode and there will be an icon in the upper left corner of the screen.
Press OK to start recording and the icon will start to flash.
Press "OK" again to stop recording and the icon will disappear.
8-2. Photo Shooting & Setting
Switch the camera on and press "Mode" to select "Photo shooting Mode".
The icon in the upper left corner of the screen shows, that the camera is in the photo shooting mode.
Press "OK" to take photos.